For many years there was just one single reliable way for you to store info on your personal computer – working with a disk drive (HDD). Having said that, this type of technology is by now displaying it’s age – hard drives are loud and slow; they can be power–ravenous and frequently produce lots of warmth throughout serious operations.

SSD drives, however, are quick, consume significantly less power and tend to be far less hot. They furnish a brand new way of file access and data storage and are years in advance of HDDs in relation to file read/write speed, I/O effectiveness and energy effectivity. Discover how HDDs stand up up against the more recent SSD drives.

1. Access Time

Due to a revolutionary new approach to disk drive general performance, SSD drives permit for considerably faster data file accessibility speeds. With an SSD, file accessibility times are far lower (as small as 0.1 millisecond).

The technology driving HDD drives dates back to 1954. Even though it has been substantially enhanced throughout the years, it’s nonetheless can’t stand up to the revolutionary ideas driving SSD drives. Utilizing today’s HDD drives, the very best file access rate it is possible to attain can vary somewhere between 5 and 8 milliseconds.

2. Random I/O Performance

As a result of the completely new revolutionary data storage strategy embraced by SSDs, they give you swifter data access speeds and better random I/O performance.

Throughout our trials, all SSDs confirmed their capacity to take care of at the very least 6000 IO’s per second.

During the exact same tests, the HDD drives proved to be much slower, with only 400 IO operations managed per second. While this looks like a large amount, for people with a busy web server that serves a lot of well–known web sites, a sluggish hard disk drive may result in slow–loading websites.

3. Reliability

The absence of moving components and spinning disks inside SSD drives, as well as the recent advancements in electronic interface technology have resulted in a much better data file storage device, with an average failure rate of 0.5%.

HDD drives make use of spinning hard disks for holding and reading through data – a concept dating back to the 1950s. And with hard disks magnetically suspended in mid–air, rotating at 7200 rpm, the prospect of one thing going wrong are considerably increased.

The regular rate of failure of HDD drives varies amongst 2% and 5%.

4. Energy Conservation

SSDs don’t have any moving elements and require not much cooling power. Additionally, they require not much electricity to perform – tests have indicated they can be powered by a regular AA battery.

In general, SSDs consume somewhere between 2 and 5 watts.

HDD drives can be well known for becoming noisy; they can be at risk of heating up and if there are several disk drives in a server, you’ll want one more a / c unit just for them.

As a whole, HDDs use up somewhere between 6 and 15 watts.

5. CPU Power

Thanks to SSD drives’ higher I/O functionality, the key hosting server CPU will be able to process data file queries much faster and preserve time for other functions.

The average I/O delay for SSD drives is only 1%.

By using an HDD, you need to invest additional time anticipating the outcomes of your file ask. It means that the CPU will stay idle for further time, awaiting the HDD to respond.

The typical I/O delay for HDD drives is approximately 7%.

6.Input/Output Request Times

The vast majority of File Host Provider’s brand new servers are now using exclusively SSD drives. Our very own tests have established that with an SSD, the average service time for an I/O request whilst operating a backup continues to be under 20 ms.

In contrast to SSD drives, HDDs offer noticeably reduced service rates for input/output queries. In a web server backup, the regular service time for an I/O request ranges somewhere between 400 and 500 ms.

7. Backup Rates

One more real–life advancement will be the rate with which the back up has been made. With SSDs, a hosting server data backup now can take no more than 6 hours using our web server–enhanced software.

We implemented HDDs exclusively for a couple of years and we have decent familiarity with how an HDD performs. Creating a backup for a hosting server designed with HDD drives will take about 20 to 24 hours.

If you want to without delay improve the overall effectiveness of one’s websites and never have to adjust any code, an SSD–driven hosting service will be a great alternative. Look at the Linux web hosting packages packages and additionally our Linux VPS web hosting packages – our solutions feature extremely fast SSD drives and can be found at good prices.


  • Service guarantees

  •  
  • Register now. There won’t be installation service fees and you’ll have full root/administrator access to your server. 99.9% network uptime is guaranteed.
  • Compare our prices

  •  
  • Simply review the parameters and features provided by all of our Virtual Private Servers. Find exactly which VPS Web Hosting configuration offers you everything that you need to take care of your dynamic online presence with ease.
  • Compare our hosting plans
  • Contact Us

  •  
  • Get in touch with us 24 hours by email or by making use of our really–fast ticketing system. Our techs are going to respond to any requests within 1 hour.